Tuesday, December 28, 2010

Cluster Multicast Messaging and Unicast Messaging Mode

When servers are in a cluster, these member servers communicate with each other by sending heartbeats and indicating that they are alive. 
For this communication between the servers, either unicast or multicast messaging is used. This is chosen from the admin console in Cluster -> Configuration -> Messaging -> Messaging Mode.
To use multicast messaging, hardware configuration and support for multicast packets is required. 
Unicast does not have this requirement, which is why using unicast in latest versions is recommended.
When multicast messaging is used, it is a one-to-many communication, every server sends the notification/heartbeat/multicast packet to each other. This causes a heavy load on the application’s multicast buffer, so if the buffer is full, new multicast messages cannot be written to the buffer and the application is not notified when messages are dropped. So there is a possibility that the server instances miss the messages. This might lead in the cluster throwing out the server instances out of the cluster.
Unicast configuration is much easier because it does not require cross network configuration that multicast requires. Additionally, it reduces potential network errors that can occur from multicast address conflicts.
Mode of Communication:

Multicast – A multicast address and multicast port is used for listening to the messages.
Unicast – A network channel is used for communication between the servers. If no channel is     
             specified, default network channel is used.
Method of communication between servers:

Multicast – Each server communicates with every member server in the cluster. Which means heartbeats are sent to every server.
Unicast - For the member servers in the cluster, group leaders are chosen and only those group leaders communicate with the servers among the group and these leaders notify each other about the availability of all the other servers.
For example : Suppose there are 6 servers in the cluster. 2 groups are made and there are 2 group leaders. Other 2 servers of the group will notify their leader that they are alive and the group leader will send this information to the leader of other group.
The frequency of communication in unicast mode is similar to the frequency of sending messages on multicast port.
For new server versions, using unicast is recommended because it is a simplified communication mode. But for backward compatibility with the previous versions, you will need to use multicast if there is a communication requirement between clusters of versions prior to WLS 10.0.
Whenever the messaging mode of the cluster is changed, all the servers in the cluster need a restart because the changes are not dynamic.

No comments:

Post a Comment